在新兴的电动汽车（EV）行业抢占先机。 学习电动汽车的工作原理和保养方法。
参与者学习每个组件的原理，包括高压电池、车载充电器、逆变器、电机、高压安全联锁、刹车和悬架，然后将其安装在车辆上。
其他课程包括与电动汽车相关的独特系统的基本诊断、维修和维护程序。 在实验室练习中使用特殊的工具和诊断设备。
电动车保养课程
混合动力和电动汽车安全与技术
课程目标
• Locate relevant safety information
• Discuss and demonstrate how to properly disable high voltage systems on modern hybrid and electric vehicles
• Properly identify high-voltage cables and components on modern hybrid and electric vehicles
• Discuss the advantages and disadvantages of battery electric, hybrid, and plug-in hybrid-powered vehicles
• Understand the different types of hybrid & electric vehicles
• Discuss the charging infrastructure and what the future holds for EVs
• Discuss vehicle charge times and why they differ depending on the location and charger being used
教学大纲
本课程涵盖混合动力汽车（hev），插电式混合动力汽车（phev）。 本课程介绍了不同类型的充电站和充电站安全系统，以及每一类下不同的车辆。 您将学习如何识别不同的先进电动驱动车辆及其组件。 这个研讨会回顾了你应该如何处理和评估一个事件。
接触时间
8
对比增强超声
没有
行业标准，国家或国家认证
认证
没有一个
网站
没有一个
认证学习成果/要求
CE或CU发音
没有
先决条件
没有一个
所需学习用品
没有一个
临床场地/特殊设施
没有一个
成功完成的要求
80%的出勤率
认可/特别批准要求
N /一个
目标受众
特定的行业或业务支持需求
N /一个
威克县需要工业职位
N /一个
与就业培训成果相关的行业或职位名称
目前没有有效的课程。
To be notified when this course becomes available, please use
Wake Tech的“通知我”服务.
Automotive - "The Switch" Building an Electric Vehicle
课程目标
完成本课程后，学生将能够：
1. Identify and Use High Voltage measuring and Personal Protective Equipment
2. Identify low and high voltage circuits
3. Solve calculations for electricity, including storage capacity, charge rates, and power flow
4. Use hand tools to mount and adjust the components
5. 在手工工具和高压元件周围进行安全操作
教学大纲
1. Electricity basics
a. Ohms Law
b. Watts Law
c. Basic Circuits
d. Relay Circuits
2. Battery
a. Identify types of battery chemistry
i. Lead acid
ii. NiMH
iii. Lithium
b. Identify configuration
i. Foil, spiral, prismatic cells
ii. Series vs Parallel arrangement
c. Assemble and mount the battery
3. Battery Management System
a. Cell monitoring
b. Cell balancing
c. Current monitoring
d. Mount and connect the BMS
4. On Board Chargers
a. Charging rates
b. Charger safety protocols
c. Moun the OBC
5. Motors
a. DC vs AC motors
b. Motor speed control
c. Mount the motor
6. Low voltage system
a. Lighting circuits
b. Mount the lighting and wire harness
c. DC-DC converters
d. Mount the DC-DC converter
e. Safety Interlocks
f. Wire in safety interlocks
7. Steering, suspension, brakes
a. Basic suspension and steering theory
b. Mount the suspension
c. Align the front wheels
d. Basic brake theory
e. Mount and bleed brakes
8. Software
a. BMS software
b. Controller Software
c. Monitoring software
d. Program and configure modules
9. Driving
a. Test drive to verify all components function
b. Monitor current use and range
c. Calculate efficiency
d. Reconfigure settings and compare after follow-up test drive
接触时间
96
对比增强超声
没有
行业标准，国家或国家认证
认证
汽车卓越服务（ASE）和国家认证中心联盟（NC3）
网站
https://www.ase.com https://www.nc3.net
认证学习成果/要求
CE或CU发音
没有
先决条件
没有一个
所需学习用品
没有一个
临床场地/特殊设施
没有一个
成功完成的要求
90%的出勤率
认可/特别批准要求
N /一个
目标受众
特定的行业或业务支持需求
N /一个
威克县需要工业职位
N /一个
与就业培训成果相关的行业或职位名称
目前没有有效的课程。
To be notified when this course becomes available, please use
Wake Tech的“通知我”服务.
混合动力和电动汽车诊断与维修
课程目标
学生将…
a.利用服务信息（电气图、诊断图表、规格）对混合动力和电动汽车进行诊断和维修。
b.将电气/电子理论应用于现代混合动力和全电动汽车中使用的独特系统和组件的操作。
c.熟练使用插电式和全电动汽车充电。
d.熟练使用数字万用表并通过NC3认证。
e.通过使用适当的诊断工具和正确解释测试数据来评估混合动力和电动汽车的性能。
f.利用专门的诊断设备测试和验证车辆性能。
在执行实验室维修任务时使用专门的维修工具和设备。
正确完成所有分配的实验任务。
学生也将....
1. 遵守与不同车辆相关的特殊安全程序。
2. 查找相关的安全信息。
3. 使用技术信息研究系统运行，以确定如何安全处理和禁用各种电气系统。
4. Use appropriate disconnect procedures to remove the charging cable from the vehicle and charging station
5. Use appropriate start up procedures and how to engage the vehicle for operation
6. 根据可用的车辆数据和服务信息，使用适当的关机程序。
7. 了解如何识别安全/不安全的充电站/插头
教学大纲
a. Hybrid Electric Vehicles
i. Define what a hybrid vehicle is
ii. Compare the differences between series, parallel and series-parallel hybrid configurations
iii. Analyze the basic operational differences between the different types of electric hybrid vehicles
iv. Identify the accessory components found in hybrid electric vehicles
b. Review of Electrical Theory
i. Explain the basic principles of electricity
ii. Examine the effects of various circuit failures in both series and parallel circuits
iii. Examine how the principles of electromagnetism effect electric drive systems
iv. Describe the relationship between electricity and magnetism
v. Explain how self and mutual inductance is used
c. Unique Hybrid Electrical Circuits
i. Describe the basic operation of electric motors and generators
ii. Identify the major parts of a DC motor and a three-phase AC motor
iii. Explain the differences between a motor and a generator (AC and DC)
iv. Analyze the operation of a controller in a motor/generator circuit
v. Examine the communication and multiplex systems used in most hybrid electric vehicles
vi. Explain the function and operation of an inverter
vii. Describe the operation and function of the idle stop mode
viii. Examine the operation and function of regenerative braking
ix. Describe the basic operation and function of the air conditioning system found in most hybrid electric vehicles
d. High Voltage Battery Packs
i. Explain the purpose of a high voltage battery pack
ii. Describe the construction, and operation of the various types of high voltage batteries
iii. Explain how hybrid batteries are recharged
iv. Examine the operation and construction of the high voltage battery cooling system
v. Identify the precautions that must be adhered to when working with or around high-voltage systems
vi. Identify diagnostic method to test high voltage batteries
vii. Identify methods to recondition various high voltage batteries
viii. Identify and demonstrate procedures for removing and replacing high voltage battery packs
ix. Identify and demonstrate diagnostic testing on the battery management system
x. Identify and demonstrate procedures diagnostic testing on high voltage systems cooling system
e. Hybrid Transaxles
i. Compare the differences between a conventional transmission and those used in most hybrid and electric vehicles
ii. Examine the basic operation of the transaxle used in its hybrid and electric vehicles
f. Maintenance and Service:
i. Examine the unique methods of servicing a hybrid and electric vehicle
ii. Identify the procedure for de-powering the high-voltage system
iii. Identify the preventative maintenance procedures unique to a hybrid and electric vehicle
iv. Describe the special diagnostic tools that must be used on a hybrid and electric vehicle
3. Course Lab Content
a. Identification and Operation
i. Identify unique hybrid and electric components and systems
ii. Explain the major systems function
b. Safety Procedures
i. Identify and locate safety shut-off switches
ii. Perform general safety procedures and follow safety guidelines
c. Routine Maintenance
i. Perform traditional services impacted by hybrid and electric vehicle design
ii. Perform various maintenance tasks required on hybrid and electric vehicles
d. Battery Maintenance
i. Perform battery diagnostics
ii. Diagnose a hybrid battery
iii. Perform diagnostic testing on the battery management system
iv. Perform diagnostic testing on the high voltage systems' cooling system
e. Troubleshooting
i. Demonstrate how to use special diagnostic tools
ii. Perform various diagnostic procedures
iii. Interpret and identify Diagnostic Trouble Codes (DTCs) associated with hybrid vehicles
iv. Perform diagnostic testing on a multiplex communication system
为什么我们需要电动、插电式和混合动力汽车？
A. Oil dependency
B. Vehicle emissions and air quality
2. Battery Electric Vehicles
A. History of electric vehicles
B. Location of and safety concerns for Traction battery vehicles
1. High voltage strings
2. Charging
3. Maintenance
4. Traction motors
5. 控制器和逆变器
3. Hybrid Electric Vehicles
A. Location of and safety concerns for a hybrid vehicle
B. Drive train configurations
1. Series
2. Parallel
C. Electric motor control
D. ICE controls
E. Hybrid module principles
接触时间
40
对比增强超声
1
行业标准，国家或国家认证
认证
全国认证中心联盟
网站
认证学习成果/要求
NC3认证中心是一个入门级的NC3会员，专为高中、大学和其他希望提供小规模认证的教育机构而设计。
CE或CU发音
没有
先决条件
成功完成本课程要求90%的出勤率和满意的课堂参与度（即能够熟练掌握所教授的所有概念）。 学生 with irregular attendance, less than 90%的出勤率, or who are unable to demonstrate competency will receive a grade of NG (no grade)
学生 must arrive on time on testing day. 考试开始后，学生不得进入教室。 没有 makeup testing dates will be offered
Lab exercises, when applicable, are due on the date assigned by the instructor. 迟交的作业只有在导师的决定下才会被接受。
所需学习用品
没有tebook
Pen
Safety glasses
Safety shoes
Gloves
临床场地/特殊设施
汽车车库/实验室
成功完成的要求
90%的出勤率
认可/特别批准要求
N /一个
目标受众
有兴趣成为电动汽车诊断、维护和维修技术人员的学生。 本课程面向具有诊断程序和设备基本知识的有经验的技术人员。
特定的行业或业务支持需求
采购产品汽车车身修理，修复，和碰撞。
威克县需要工业职位
互操作性测试工程师，电动汽车充电ABB - Cary， NC常规
与就业培训成果相关的行业或职位名称
目前没有有效的课程。
To be notified when this course becomes available, please use
Wake Tech的“通知我”服务.
Automotive - "The Switch" Building an Electric Vehicle - HIGH SCHOOL SUMMER CAMP PROGRAM
学生 can request an application by emailing [email protected]
学生 can not register online until the application has been submitted
课程目标
完成本课程后，学生将能够：
1. Identify and Use High Voltage measuring and Personal Protective Equipment
2. Identify low and high voltage circuits
3. Solve calculations for electricity, including storage capacity, charge rates, and power flow
4. Use hand tools to mount and adjust the components
5. 在手工工具和高压元件周围进行安全操作
教学大纲
1. Electricity basics
a. Ohms Law
b. Watts Law
c. Basic Circuits
d. Relay Circuits
2. Battery
a. Identify types of battery chemistry
i. Lead acid
ii. NiMH
iii. Lithium
b. Identify configuration
i. Foil, spiral, prismatic cells
ii. Series vs Parallel arrangement
c. Assemble and mount the battery
3. Battery Management System
a. Cell monitoring
b. Cell balancing
c. Current monitoring
d. Mount and connect the BMS
4. On Board Chargers
a. Charging rates
b. Charger safety protocols
c. Moun the OBC
5. Motors
a. DC vs AC motors
b. Motor speed control
c. Mount the motor
6. Low voltage system
a. Lighting circuits
b. Mount the lighting and wire harness
c. DC-DC converters
d. Mount the DC-DC converter
e. Safety Interlocks
f. Wire in safety interlocks
7. Steering, suspension, brakes
a. Basic suspension and steering theory
b. Mount the suspension
c. Align the front wheels
d. Basic brake theory
e. Mount and bleed brakes
8. Software
a. BMS software
b. Controller Software
c. Monitoring software
d. Program and configure modules
9. Driving
a. Test drive to verify all components function
b. Monitor current use and range
c. Calculate efficiency
d. Reconfigure settings and compare after follow-up test drive
接触时间
40
对比增强超声
没有
行业标准，国家或国家认证
认证
汽车卓越服务（ASE）和国家认证中心联盟（NC3）
网站
https://www.ase.com https://www.nc3.net
认证学习成果/要求
CE或CU发音
没有
先决条件
没有一个
所需学习用品
没有一个
临床场地/特殊设施
没有一个
成功完成的要求
90%的出勤率
认可/特别批准要求
N /一个
目标受众
特定的行业或业务支持需求
N /一个
威克县需要工业职位
N /一个
与就业培训成果相关的行业或职位名称
目前没有有效的课程。
To be notified when this course becomes available, please use
Wake Tech的“通知我”服务.
"The Switch" Building an Electric Vehicle - High School Summer Camp Program
课程目标
Identify and use high-voltage measuring and personal protective equipment
Identify low- and high-voltage circuits
Solve calculations for electricity, including storage capacity, charge rates and power flow
Use hand tools to mount and adjust the components
Demonstrate safe work practices around hand tools and high-voltage components
教学大纲
Electricity Basics
a. Ohms Law
b. Watts Law
c. Basic Circuits
d. Relay Circuits
Battery
a. Identify types of battery chemistry
i. Lead acid
ii. NiMH
iii. Lithium
b. Identify configuration
i. Foil, spiral, prismatic cells
ii. Series vs. parallel arrangement
c. Assemble and mount the battery
Battery Management System
a. Cell monitoring
b. Cell balancing
c. Current monitoring
d. Mount and connect the BMS
On-Board Chargers
a. Charging rates
b. Charger safety protocols
c. Mount the OBC
Motors
a. DC vs. AC motors
b. Motor speed control
c. Mount the motor
Low-voltage system
a. Lighting circuits
b. Mount the lighting and wire harness
c. DC-DC converters
d. Mount the DC-DC converter
e. Safety Interlocks
f. Wire in safety interlocks
Steering, Suspension, Brakes
a. Basic suspension and steering theory
b. Mount the suspension
c. Align the front wheels
d. Basic brake theory
e. Mount and bleed brakes
Software
a. BMS software
b. Controller software
c. Monitoring software
d. Program and configure modules
Driving
a. Test drive to verify all components function
b. Monitor current use and range
c. Calculate efficiency
d. Reconfigure settings and compare after follow-up test drive
接触时间
40
对比增强超声
1
行业标准，国家或国家认证
认证
汽车卓越服务（ASE）和全国中心认证联盟（NC3）
网站
没有一个
认证学习成果/要求
CE或CU发音
没有
先决条件
学生必须在或即将进入高中，必须已经成功地参加了夏令营的第一部分。
所需学习用品
N /一个
临床场地/特殊设施
N /一个
成功完成的要求
90%的出勤率
认可/特别批准要求
N /一个
目标受众
本课程是为已经成功完成第一部分夏令营项目的在读或即将升入高中的学生设计的。 它是为有兴趣构建和理解简单电动汽车组件的学习者量身定制的，包括电气理论，组件组装，软件配置和车辆测试。
特定的行业或业务支持需求
N /一个
威克县需要工业职位
N /一个
与就业培训成果相关的行业或职位名称
目前没有有效的课程。
To be notified when this course becomes available, please use
Wake Tech的“通知我”服务.
